HARDWARE SPECIFICATION // DS-AIG-001-REV1
Turnkey A:iG Appliance — Technical Datasheet
Electrical ratings, processor architectures, sensor bus interfaces, and environmental operating limits.
1. System Compute & Storage Architecture
| Parameter | Specification | Notes |
|---|---|---|
| Main Processor | Intel Alder Lake-N N100 Quad-Core (Up to 3.4GHz) | 6W TDP ultra-low thermal dissipation |
| System Memory | 16GB DDR5 4800MHz SO-DIMM | High-throughput local analytics buffer |
| Telemetry Datalake | 512GB M.2 NVMe PCIe 3.0 SSD (AES-XTS-256) | Store 5+ years of 1-second raw sensor data locally |
| RF / CSI Coprocessor | ESP32-S3 Dual-Core Xtensa LX7 @ 240MHz | 52-Subcarrier 802.11n microwave presence radar |
| Network Interfaces | Dual 2.5GbE RJ45 (Intel i226-V) | Port 1: Local LAN; Port 2: Air-gapped Secure Enclave |
2. Electrical Specifications & Relay Ratings
| Channel | Contact Type | Max Voltage / Current | Isolation |
|---|---|---|---|
| Relay 1 (Lighting) | SPDT Form C (Dry Contact) | 250VAC @ 10A / 30VDC @ 10A | 3,750VRMS Optoisolated |
| Relay 2 (HVAC Call) | SPDT Form C (Dry Contact) | 24VAC/VDC @ 5A (Thermostat Y1/Y2) | 3,750VRMS Optoisolated |
| Relay 3 (Dehumidifier) | SPDT Form C (Dry Contact) | 24VAC/VDC @ 5A (Quest terminal) | 3,750VRMS Optoisolated |
| Relay 4 (CO2 / Solenoid) | SPDT Form C (Dry Contact) | 120VAC @ 10A / 24VDC @ 10A | 3,750VRMS Optoisolated |
| Chernobyl Port | Series Contactor Break Loop | 240VAC @ 40A Contactor Coil Loop | Analog Bimetallic Failsafe |
3. Sensirion Sniffer Pod Tolerances
| Sensor Module | Measurement Range | Accuracy Tolerance | Response Time (t63) |
|---|---|---|---|
| Sensirion SHT45 (RH) | 0% to 100% RH | ±1.5% RH (Typical) | 4 seconds |
| Sensirion SHT45 (Temp) | -40°C to +125°C (-40°F to 257°F) | ±0.1°C (±0.18°F) | 2 seconds |
| Senseair S8 (NDIR CO2) | 400 to 2,000 ppm (Extended to 10k ppm) | ±30 ppm ±3% of reading | 15 seconds |
4. Mechanical & Environmental Ratings
Dimensions: 210mm × 145mm × 42mm (8.27" × 5.71" × 1.65")
Weight: 1.15 kg (2.53 lbs) with heatsink
Enclosure Material: 6061-T6 Anodized Aluminum + Copper Fin Array
Ingress Protection: IP54 (Dust protected, splash water resistant)
Operating Ambient: 0°C to +50°C (32°F to 122°F)
Operating Humidity: 10% to 95% Non-condensing